Filter By:
- Parts & Accessories (9)
- Pedals (55)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
$60.00
$80.00
25% Off
PD-EH500 pedals
FEATURE
- One side SPD, the other side flat
- Light action binding makes frequent stepping-in & out easier
- Better grip on flat side for wet condition
BENEFIT
- Convenient road touring pedal
- Optimized for urban riding
- Multi-condition
- Best match with CT or MT shoes
$135.00 - $180.00
$180.00
Up to 25% Off
Low And Lean
Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on.
Round And Round We Go
Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable.
Ride Don't Slide
Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck.
Look Good Ride Good
Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like.
Pedal Envy
More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):14.5
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 114 x 101
- Weight: 355g
$135.00 - $180.00
$180.00
Up to 25% Off
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$31.50 - $42.00
$42.00
Up to 25% Off
Giant's Original MTB Core Platform Pedals are a treat for your mountain-riding feet. The wide, stable aluminum platforms have a scalloped shape with 10 replaceable and adjustable traction pins for an awesome grip. And, for excellent durability, there are heat-treated boron steel axles and quality bearings.
- 9/16-inch spindles
$47.25
$63.00
25% Off
Giant's Original MTB Sport Platform Pedals are ready to tame your local trails. They boast wide, stable aluminum platforms with a scalloped shape plus 10 replaceable and adjustable traction pins for an awesome grip. And, for excellent durability, there are tough chromoly axles and fine sealed bearings to keep the dirt and mud out.
- 9/16-inch spindles
$63.75
$85.00
25% Off
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings.
- 352 grams (pair)
$37.50
$50.00
25% Off
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 100mm x 100mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 299g per pair
$37.50
$50.00
25% Off
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair
$45.00
$60.00
25% Off
The X-TRACK is LOOK's entry level off-road pedal, but does not mean technology is left aside. The aluminum body and Chromoly+, double-sealed axles are robust and ensure total fluidity thru the pedal stroke. Tension can be quickly and easily adjusted from 6 thru 14.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Aluminum
- Spindle: Chromoly+
- Platform area: 350mm²
- Platform width: 57mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 200g
- Weight (pair + cleats): 450g
- Float angle: 6°
- Release angle: 13°
$67.50
$90.00
25% Off
The GEO TREKKING GRIP pedals are ideal for commuting. Featuring a one-sided SPD-compatible mechanism, with a flat surface elastomer grip on the other, safe for riding in any conditions.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Composite / Elastomer bi-injection
- Traction: Elastomer bi-injection
- Spindle: Chromoly+
- Platform width: 86mm
- Weight (pedal): 228g
- Weight (pair + cleats): 511g
$20.99
$27.99
25% Off
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking.
- Use: Road
- Material: Polyamide + TPU
- Lateral adjustment: 4mm
- Longitudinal adjustment: 9mm
- Weight (pair + fasteners): 68g
$112.50
$150.00
25% Off
The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.
$115.00
Featuring an optimal surface area for maximum engagement with a minimalist profile for maximum clearance, the all-new Pinner Pro flat pedal series is purpose built for the rigors of aggressive trail, enduro and DH shredding.
- Maximized concave surface area (2mm) combined with a minimalist profile for secure, efficient pedaling action.
- Durable forged A380 aluminum platform withstands the toughest impacts.
- Tough chromoly steel spindle for long lasting stability.
- 10 replaceable and adjustable metal pins (per side) for maximum foot engagement and security.
- Sealed cartridge bearing for smooth long-lasting performance.
$75.00 - $100.00
$100.00
Up to 25% Off
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding.
- 310 grams (pair)
$71.24
$94.99
25% Off
The X-TRACK RACE shares its design with the CARBON and Ti models, offering a composite body and Chromoly+ axle for optimal stiffness while riding. The SPD mechanism functions reliably even in the most extreme conditions, shedding mud and debris which may get caught under your shoes.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Composite
- Spindle: Chromoly+
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 182g
- Weight (pair + cleats): 415g
- Float angle: 6°
- Release angle: 13°
$50.00
These extremely durable pedals are constructed of a nylon composite thermoplastic body and feature eight removable steel M3 pins per side for superior grip.
- One sealed bearing is paired with a long-lasting DU sleeve in each pedal for an impressively smooth interface
- Chromoly steel spindle for strength
- Spindle size: 9/16-inch
$30.00 - $42.00
$40.00 - $42.00
Up to 25% Off
- Scallop shape provides extra grip and a stable platform.
- Low-profile design.
- 10 replaceable and adjustable pins per side.
- Giant original Laser-etched pattern.
- Ball bearing.
- Cro-Mo axle.
$105.00
$140.00
25% Off
Size specific magnesium platform pedal provides optimal shoe/pedal interface.
Details
- Magnesium pedal body for weight reduction
- Optimal surface area
- Minimal body profile - 16mm thin
- Concave pin profile & 10 adjustable pins per side for grip
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Serviceable, pedal refresh kit found here
Specs
- Adjustable pins: 10 per side
- Body material: AM60B Magnesium Alloy
- Endcap: T15
- Footprint: 114mm x 111mm
- Inner bearing type: Igus Bearing
- Max rider weight: No restriction
- Outer bearing type: Double Cartridge Bearing
- Shoe size: US 10-15 // EU 43-49
- Spindle material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 386g per pair
$112.50 - $150.00
$150.00
Up to 25% Off
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.
$16.50 - $22.00
$22.00
Up to 25% Off
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats.
- Use: Road & Indoor Bike
- Material: Polyacetal + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 75g
$56.25 - $75.00
$75.00
Up to 25% Off
Express your personality while boosting your riding enjoyment and safety with the awesome new Geo City Grip featuring LOOK Activ Grip by Vibram. We’ve combined our legendary pedal performance with the expertise of the world’s most famous mountain grip brand to create a fantastic, fun, colorful town and country pedal.
- Technology: Flat pedals + LOOK Activ Grip by Vibram
- Body: Composite
- Traction: Vulcanized Rubber Activ Grip
- Spindle: Chromoly+
- Surface area: 107x103mm
- Weight (pedal): 265g
- Weight (pair): 530g
$63.00
- Scallop shape provides extra grip and a stable platform.
- Low-profile design.
- 10 replaceable and adjustable pins per side.
- Sealed bearings.
- Cro-Mo axle.
$52.50
- Slim and lightweight nylon composite body built tough for DH and enduro riding
- Concave shape and 9 replaceable pins per side for secure foot engagement
- Durable chromoly steel spindle
- Sealed cartridge bearing for smooth long-lasting performance
- Weight: 380g
$102.75
$137.00
25% Off
- Maximized concave surface area (2mm) combined with a minimalist profile for secure, efficient pedaling action.
- Durable magnesium alloy platform withstands the toughest impacts with minium weight.
- Tough chromoly steel spindle for long lasting stability.
- 10 replaceable and adjustable metal pins (per side) for maximum foot engagement and security.
- Sealed cartridge bearing for smooth long-lasting performance.
$45.00 - $60.00
$60.00
Up to 25% Off
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g
$75.00 - $100.00
$94.99 - $100.00
Up to 25% Off
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 355g per pair
- Warranty: 5 years
$37.00
- Slim and lightweight nylon composite body built tough for DH and enduro riding
- Concave shape and 9 molded pins for maximum grip
- Durable chromoly steel spindle
- Sealed cartridge bearing for smooth long-lasting performance
- Weight: 350g
$60.00
The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap.
- Thin, concave profile - 13.5mm to 15.5mm pedal body height
- One-piece replaceable traction pins, 10 per pedal
- Upgraded, fully serviceable IGUS bearings and seal system
- Forged SCM 435 Chromoly Steel spindle
- Optimal size-specific surface area
- Platform dimensions: 114 x 114mm
- Large recommended for shoe sizes: 10-15 (US M) // 43.5-49 (EU)
$60.00
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip.
- Premium brass cleats with shims included
- Q-factor: 57mm
- Release angle: 15° / 20°
- Forged 435 Chromoly steel spindle
- 300 series stainless steel spring
- 5-year warranty
- 331g per pair
$75.00
$100.00
25% Off
The EXPLORER PD-ES600 pedals are designed for rides requiring frequent engagement and disengagement, such as city touring. Light action springs allow for easy entry and exit, making the new rider feel more confident.
CLEAN APPEARANCE
- The PD-ES600 features a clean appearance body for use on lightweight road touring bikes.
EASY RIDER ADJUSTMENT
- Easy-to-adjust entry and release tension settings.
SYSTEM ENGINEERED TO WORK TOGETHER
- SHIMANO RT footwear is designed to match the PD-ES600.
$18.74
$24.99
25% Off
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Weight of 24 grams per cleat
- 4.5-degree floating arc
$20.25
$27.00
25% Off
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
$67.50
$90.00
25% Off
The X-TRACK EN-RAGE is a sturdy pedal to accompany you on your favorite trail ride with varying terrain. The forged aluminum body is designed to resist extreme conditions and potential abuse from trail riding. The large contact area is perfect for riders looking for a comfortable width that offers security but also a surface contact-to-weight ratio which remains best in class for trail pedals.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Aluminum
- Spindle: Chromoly+
- Platform area: 545mm²
- Platform width: 63mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 210g
- Weight (pair + cleats): 470g
- Float angle: 6°
- Release angle: 13°
$45.00 - $60.00
$60.00
Up to 25% Off
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
- Spindle material: Forged scm 435 chromoly steel
- Body material: One piece composite
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 294g per pair
- Warranty: 5 years
$135.00 - $180.00
$180.00
Up to 25% Off
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: 6061-T6 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- adjustable pins: 6 per side for grip
- endcap: hex alloy
- cleat: premium brass cleats with shims included
- weight: 419g per pair
$36.75 - $49.00
$49.00
Up to 25% Off
The Compound pedals are fully serviceable with sealed bearings and chromoly pins and spindle. These pedals beg you to challenge them as they continue to perform hassle free for as long as you let them. Not only will they surprise you with durability, but the colored composite pedal body never fades or shows wear as the color runs throughout to deliver a fresh pedal day in and day out.
- Lightweight injection-molded nylon fiber composite body
- Replaceable chromoly pins
- Super-thin profile
- DU bushing and double-micro-sealed bearing system
- Fully sealed, rebuildable, thin, and offer the same grip as a traditional aluminum pedal
- Nylon fiber blend does not get hung up on rocks or ledges
- Nylon fiber body does not shatter
- 9/16"
$44.99
$59.99
25% Off
- Body material: Aluminum
- Spindle material: Chromoly +
- Weight: 390g |pair
- Surface area: 350mm²
- SPD compatible
$11.25
$15.00
25% Off
- One-piece resin body
- Juvenile size platform
- Boron spindle
- 390g pair
$85.00
Lightweight, reliable XC mountain bike pedals with double sided SPD compatible engagement, sealed cartridge bearings and adjustable release tension.
- Dual-side Shimano SPD compatible engagement.
- Widely adjustable release tension.
- Lightweight CNC machined aluminum body.
- Stout Cr-Mo spindle.
- Sealed bearings.
- Optimal mud shedding cage design.
- Includes cleats and mounting hardware.
$80.00
- Lightweight, strong composite cage body.
- CNC-machined chromoly steel axle.
- LSL and Sealed bearings for smoother pedaling and durability.
- Binding adjustable tension (80-180 kgf-cm).
$19.00
- Compatible with LOOK cleats system.
- 3 float options (0/4.5/9).
- Memory position for separate front and rear cleat.
$41.25 - $55.00
$55.00
Up to 25% Off
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!
$37.50
$50.00
25% Off
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction pins: 9 per side (mounted from back)
- Inner Bearing type: Igus LL-glide bearing
- Outer Bearing type: Enduro cartridge bearing
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair
$37.50
$50.00
25% Off
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: 10-15 (us) // 43-49 (eu)
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair
$105.00 - $130.00
$130.00 - $140.00
Up to 25% Off
Size-specific elite-level platform pedal provides optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable pins per side for grip
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU)
Specs:
- Spindle material: Forged SCM 435 chromoly steel
- Body material: 6061-T6 aluminum
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Footprint: 114mm x 111mm
- Adjustable pins: 10 per side
- Weight: 455g per pair
- Warranty: 5 years
$75.00 - $100.00
$100.00
Up to 25% Off
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.
$13.50
$18.00
25% Off
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
$22.00
$26.00
15% Off
Designed for use on a variety of bikes, from commuters to adventure, the lightweight aluminum-body Domain flat pedal is built to last.
- Polished alloy body.
- Durable coated alloy cage.
- 9/16" steel axle.
- Smooth ball bearing internals.
$26.25
$35.00
25% Off
- Forged alloy body and cage
- Chromoly spindle
- Toe clip compatible (clips included)
- 504g pair
- 9/16-inch spindle
$30.50
- 100% SPD-SL compatible
- Front and rear of the cleats can be changed separately for exact and quick replacement
- High traction walking surface
- Mounting hardware included
- 380000038 offers 6 degrees of float (Black/Yellow)
$15.00
$20.00
25% Off
- One-piece alloy body
- Chromoly spindle
- Toe clip compatible
- Dual-sided design
- 320g pair
- 9/16-inch spindle
$72.00
A versatile, lightweight dual-sided pedal designed for use with flat soled or SPD-compatible shoes.
- Dual sided cage for clipless SPD and flat soled shoes.
- CNC machined Cr-Mo spindle .
- LSL sealed ball bearing .
- Adjustable spring tension.
- Shimano SPD compatible.
$26.99
$33.00
18% Off
- Engineering-grade thermoplastic construction
- SPD-SL compatible interface
- Cleat Type: SPD-SL
$36.00
$48.00
25% Off
Liv's Sport Pedals offer excellent pedaling efficiency for women with their smaller and low-profile platforms. They're made of light and durable aluminum with a concave shape and 5 replaceable pins per side to keep your feet nicely in place. For excellent reliability and performance they boast rugged chromoly axles and self-lubricating bushings and sealed cartridge bearings.
- 9/16-inch spindles
- 310 grams (pair)
$150.00
PD-R7000 NEW
FEATURE
- Carbon fiber reinforced resin pedal body
- Wide contact area
- 265g/pr (25g/pr lighter than PD-5800)
BENEFIT
- Optimum power transfer
- Lightweight
- Aerodynamic image
- Color: CFRP
- Average weight: 265 g
- Road clearance: 31°
- Binding: Single Sided
- Cleat included: SM-SH11
- Optional cleat: SM-SH10 / SM-SH12
- Pedal Type: Road
- Reflector: SM-PD65
$11.25
$15.00
25% Off
- One-piece resin body
- Chromoly spindle
- Toe clip compatible
- 366g pair
$180.00
Full suspension or entirely rigid, upon a mountain top or deep in the woods, it’s up to you to define your trail. The Mallet Trail pedal fills the missing piece in Crankbrother's clip-in range, sitting perfectly between the Candy and Mallet E pedals. Equipped with a long spindle for stability and speed, two adjustable pins per side for added traction, and their eggbeater system with 4-sided entry and superior mud shedding, the Mallet Trail is ready to join you on your next adventure.
- Optimized platform size and surface for trail/gravel riding
- Long spindle, 57mm q-factor for more shoe clearance and stability at speed
- Integrated traction pad technology to customize and optimize the shoe/pedal interface
- 2 adjustable pins per side for grip
- Hex alloy endcap for durability
- 4-sided entry / superior mud shedding
- Customizable float & release angle
$134.99
$160.00
16% Off
- All-road adventure/touring-inspired dual-sided clipless pedal
- AL6061 CNC machined platform with grip pins for added stability
- CNC-machined chromoly spindle
- LSL sleeve bushing and sealed bearing
- Shimano SPD style cleat with 5º float
- Fully adjustable tension
- Platform size: 90mm x 68mm
- Size: 9/16"
- Cleat Type: SPD
- Material: AL6061
Page 1 of 2
Next page